Artistic Design

 To fit in with the disaster theme, we decided to theme the robot after a beat up land rover or jeep.



We designed the chassis in CAD, and 3D printed it, before applying paint. We started with a filler -primer to try and fill in some of the layer lines and prep it for painting, before covering it with a chrome layer. 



Next we used vaseline to protect areas of silver, before painting it all orange and washing the vaseline off. 

This created a chipped paint effect, but also stripped some of the chrome paint, revealing the dull orange primer, making the car seem rusted. Although this was not our intention, it worked out quite well. We chose to do a bright orange overcoat, as it has connotations of danger.




Comments

Post a Comment

Popular posts from this blog

The Beginnings of a Robot

Image
To begin with, we looked at what our options were and then strategised. We decided to use the motors and custom motor brackets from a previous robot, as they were worked well on our PiWars robot last year. Our aim for this session was to create a drivable robot. We used Solidworks to design a simple chassis with holes to bolt on the motors, pi and batteries. We made it out of clear orange acrylic which we cut out on the laser cutters at Cambridge Makespace. Once we had assembled the robot, we used the code off of the previous robot to drive it about and ended up with a successful robot. 
Read more

Our Intentions

Image
Our Intentions The theme for PiWars 2024 is disaster zone, so we have decided to theme our robot around a post-apocalyptic Land Rover.   We are aiming to compete in all of the challenges, and are in it to win it!
Read more